 The majority of customers, buyers Please note : As the photo shows, We can not guarantee that page shows the value of color and real commodity exactly the same color, understanding! |
|
 |
 |
|
Product Name:
GZ-type cantilever constant strong electric blenders |
Product Intro:
Aircraft through the friction-wheel-drive system realize stepless speed regulation, but the motor is always running on fixed working point, the power output of motor speed and torque to achieve optimization in the point value and remained constant. Power through the friction wheel and fitted with a pair of plastic coupling unit delivered to the mixing of the axial axis. Two gears in the same grade configuration to form the two axis can be manually adjust the speed of the two respectively. If neglected the depletion of power transmission, stirring shaft end of motor output power is always equal, in the axis of a pair of spiral coupling allows wear friction wheel maintained at a relatively low level. Stirring shaft coupling device in accordance with the automatic adjustment of the load on the friction wheel pressure needed, low-load caused by the low pressure, high load caused by high pressure.
Shift experiments should pay attention to mixing the first location and the size of containers, especially glass container. Shift must be closed before the mixer, or reduction gear may be damaged. It has two respectively the speed, I file for low speed, II files for high-speed. Preset position for the II profile, II file for when I file, counter-clockwise (from top-down look) plastic rotational bearing sets to stop bit. 5.5mm pull down then rotate clockwise until passed ball bearings to hear the sound of reset. I file-for-II profile, the counterclockwise rotation bearing sets to stop bit, up to promote 5.5mm, then clockwise until the ball to hear the sound reduction. |
Details:
Main technical parameters:
1, specifications Model: GZ120 ordinary
GZ120 • S (digital display)
2, machine output power: 120W
3, rated power: 220 ~ 250V
4, job status: a long time of continuous work
5, Speed range: I-class 60 ~ 500rpm
II-class 240 ~ 2000rpm
6, stirring axis maximum torque: 1850gcm
7, the maximum mixing capacity (water): 20 liters
8, the ambient temperature: 5 ~ 40 ℃
9, drill chuck clamping range: 0.5 ~ 10mm
10, stirring axis penetration range: 0.5 ~ 8mm
11, the application of medium viscosity: 0 ~ 10000mpas
|
|
Product recommendation: