The main parameters:
  1, wiping stroke: 120 ± 5mm
  2, cleaning frequency: 0 ~ 60 times / min
  3, Dutch weight: 1000 ± 10 克
  4, first wipe the contact surface diameter: Φ14 ± 0.5mm
  5, the pressure on the wipe test plate: 0.06Mpa
  6, test board size: 75 × 200mm
  7, power source: 220V 50Hz
  8 Dimension: 260 × 260 × 340 (length × width × height)
  9, Weight: about 20kg

Use Instructions:
  1, unscrew both ends of the specimen clamp bolt on the adapter, the 75 × 200mm rubber samples on a fixed plate, and then rotating bolt firmly set.
  2, the check amount of absorbent cotton wrapped in contact with the surface cleaning head and put on hoop piece, tighten the screw, and then take appropriate cotton wool, wipe the head into the cavity, drops suitable solvent until the solvent cleaning head has exudation then wipe the head placed in the slide the arm.
  3, plugged the power, the number of devices with a home purchase a few, select the number of times want to wipe; rotating adjustment knob, select the desired cleaning speed (recommended by 60 beats / min, the speed knob to point to MAX).
  4, open the governor the power switch, the machine began to work at the scheduled times, the machine automatically stops, remove the sample observation.
  5 To stop the machine in operation can be added directly to close the governor the power switch, and then to continue to work to open the power switch can be governor.
  6, the machine automatically stops, just set the number of devices on the "Clear" button, the machine can operate again.

Note:
   1, not loading the sample, and cotton, the non-boot.
   2, if the cotton wool off, stop as soon as possible.